June 9, 2020
This portal bridge is ready for shipment to HOMAG Kantentechnik in Germany. The acceptance test has been completed successfully!
State of the art CNC machine: flexible and accurate
The new portal bridge will replace the bridge of the existing Uniport 6 CNC machine which HOMAG Kantentechnik has been using to their full satisfaction since 2000. With the new portal, the company once again gets a state of the art CNC machine ensuring high flexibility and great accuracy.
Sizing & edgebanding machines
HOMAG Kantentechnik is a medium-sized company that has been producing a wide range of edge banding machines for over 50 years. From newcomers to mechanical edge banding to customers with operations on an industrial scale, we have the right machine to meet every customer’s requirements for the production of kitchens, living and bedroom furniture and functional office furniture.
In focus
Uniport6000
Specification
- X-axis4.000-24.000+ mm
- Y-axis1.500-5.000 mm
- Z-axis1.000 / 1.250 mm
All news
Kostwein Group crowns UNIPORT7000 as most productive CNC machine
December 12, 2024 The Kostwein Group, headquartered in Austria and specializing in the manufacturing and assembly of complete...
Ensuring optimal machine uptime with a maintenance contract
December 11, 2024 With over 150 years of expertise in forging technology, SCHÖNEWEISS & CO GmbH is a leading specialist in...
Increased clearance height offers expanded machining capabilities
November 4, 2024 We are committed to continuous innovation, enhancing and adapting our machines to meet our customers’...
Additional machining head enhances production of forestry machinery
October 31, 2024 When Leif Fors founded his company in 1992, he could not have foreseen FORS MW growing into one of Europe’s...
Unisign Representative Meeting 2024
October 14, 2024 Last week (October 9th), we hosted the Unisign Representative Meeting 2024 in Panningen, gathering Unisign...
Ultra-precision machining of bearings
September 25, 2024 Watch this precision machining of the turning and grinding of hardened bearing rings Using our UNIPORT7000...
Celebrating a 1000 milestone
September 16, 2024 Today we celebrated a special moment in Unisign’s history: the completion of the 1000th CNC machineThis...
Bogies machined without a hitch thanks to Unisign
September 9, 2024 The engineering consultancy set up by Ernst Stadler in 1942 has since grown into a company with operations...
Leveraging local expertise in Czech Republic and Slovakia
August 26, 2024 In the competitive world of CNC machine tools, reliable and efficient service is paramount Our collaboration with...
Summer Event 2024
July 15, 2024 Start of our Summer holidays Last Friday, we kicked off the summer holiday season with our annual Unisign Summer...
Big moves
July 10, 2024 Preparing a CNC machine for transport to Germany After a successful factory acceptance test of this UNIPORT4000 CNC...
New generation of steel telescopic covers for UNICOM6000 machines
June 18, 2024 Our UNICOM6000 machines are fitted with a telescopic steel cover, also known as a Y-shaped steel telescopic cover...
Geslaagd!
11 juni 2024 Mooie prestaties 2x goed nieuws: onze afstudeerder Stan is geslaagd voor zijn HBO-Technische Bedrijfskunde aan...
Winnaar van onze LEGO wedstrijd
4 juni 2024 Mooie afsluiting van de Dag van de Maakindustrie 2024 Wat was het lastig om een keuze te maken uit al die...
UNITWIN6000: Innovative front axle machining
June 3, 2024 With pleasure we share a new case study! Bharat Forge Kilsta is one of the world’s largest forging companies It...
The perfect fit for bogie machining
April 29, 2024 Medha Servo Drives is an organization with a 40-year history, primarily serving the Indian Railways Their product...
Geslaagde open dag!
16 april 2024 Met heel veel plezier en een flinke dosis trots kijken we terug op een zeer geslaagde open dag in het kader van de...
Robust, reliable and user-friendly: the UNIPORT6000
March 11, 2024 AMA Anlagen- und Maschinenbau Amberg GmbH is a contract manufacturing company specialising in CNC machining and...
Maak het mee!
21 februari 2024 Open dag bij mooie productiebedrijven Op zondag 14 april is de 5e editie van de Dag van de Maakindustrie in...
Sharing knowledge
February 13, 2024 Last week Wednesday we had the pleasure of facilitating a captivating training session for Sandvik Coromant!...
Machine modernisation boosts your productivity and IT security
January 25, 2024 The mechanical components of your CNC machine often give you many decades of reliable serviceDuring that time,...
The first one
January 15, 2024 The premiere for the first successful 2024 factory acceptance test is for MAN Energy Solutions! Last week we...
UNIPORT6000-Machines for greater machining efficiency
January 8, 2024 New year, new case study to share: BMA Braunschweigische Maschinenbauanstalt AG For over 170 years, BMA AG has...
Aftermovie #50 years Unisign
December 18, 2023 We proudly present our exclusive aftermovie commemorating 50 years Unisign! Join us in celebrating our 2023...
UNIPORT6000-HV-OG boosts the flexibility and quality
December 12, 2023 In the spotlight: our Swiss customer Heinz Baumgartner AG In 1962, Heinz Baumgartner started his own business...
Unisign’s friendliness and willingness to help stand out
December 5, 2023 A new case study on our customer KNDS UK KNDS UK specialises in the manufacture of tactical military bridges and...
Preventive rewiring: Avoid wear and tear and increase reliability
October 24, 2023 A complete preventive rewiring of your CNC machine is advised every 12 years, based on a range of factors and...
Unisign sets the standard that all other machine manufacturers should live up to
August 28, 2023 A case study on HOMAG Kantentechnik HOMAG machines large components for its edge banding machines on a...
Maintenance and after-sales supported by extensive knowledge
July 18, 2023 “Unisign’s people are highly experienced and highly qualified This offers us much-needed peace of mind...
Open house – 50 years
June 27, 2023 Well-attended and successful open house On Sunday 25 June we celebrated 50 years with an open house for family,...
Anniversary party – 50 years
June 27, 2023 With a nice interview with former director Bart van Ruth and director Paul van Ruth Our jubilees of 2023 who were...
Discover our new corporate video
June 7, 2023 With great pleasure we present our new corporate video showcasing why Unisign truly is Your partner in productivity...
Shorter turnaround times and quality assurance for repairs
June 1, 2023 Unisign machines are known for their high reliability and availability But even though they are incredibly robust,...
Behind the scenes
May 4, 2023 In our anniversary year, we welcomed the Municipality of Peel and Maas for a company visit With pleasure we gave...
Machining head or main spindle broken?
April 4, 2023 Our rental and exchange system can keep your downtime to a minimum The main spindle or machining head on your...
Music as metaphor and inspiration source
March 27, 2023 What a fantastic start to our anniversary year! Our team-building afternoon was a surprising combination of...
Simply order online
March 6, 2023 Spares parts for CNC machines needed From now on, you can quickly and easily order spare parts for your Unisign CNC...
New addition to our machinery park
March 2, 2023 We are proud on this new addition to our machinery park Our employees Jan and Jac have recently put our new...
Completely care-free solution for machine relocation
February 6, 2023 CNC machines frequently need to be relocated for a wide range of reasons If machine relocation is a challenge...
Time to celebrate! We are 50!
January 2, 2023 2023 is a special year for us We’re celebrating our 50th anniversary! And of course, we’re not going to let...
Tool taper cleaning: essential for accurate machining
November 15, 2022 Solution for machine contamination Many of our clients are already convinced Cleaning the tool taper regularly...
Measuring is knowing
October 25, 2022 An interesting new case study on our customer IASA Instandhaltungstechnik in Switzerland and the importance for...
A one day precision job reduced to 80 seconds
October 12, 2022 With pleasure we share a short time lapse video showing the successful installation of the UNIPORT6000 at IFTEC...
Anything but standard
October 4, 2022 Is fast and accurate machining of complex work pieces with deviating curves and contours your biggest machining...
Renewal ISO 9001 certificate
September 28, 2022 Our ISO 9001:2015 certificate has been renewed for three years! Among other things, the auditor complimented...
Faster and more accurate
September 22, 2022 Do you manufacture rear axles for trucks And is maintaining consistent quality and accuracy a constant...
UNIPORT6000 is indispensable for high-precision machining
July 26, 2022 Carolin Herzmoneit (Managing Director) belongs to the second generation of the family-owned company Gontermann...
Summer Event 2022
July 11, 2022 Our annual Unisign Summer Event last Friday (July 8th) was a culinary and musical party: enjoying a delicious BBQ...
Retrofitting controls extends lifespan of legacy machines
July 7, 2022 Coek Engineering in Belgium has two UNIPORT7 CNC machines in its workshop The first gantry machine was installed in...
New: a facelift of our services web pages
July 5, 2022 The brand new services section on our website is now live! It is redesigned specifically with your needs in mind:...
5-axis portal milling machine for Switzerland
May 24, 2022 With great pleasure we welcomed our guests of Heinz Baumgartner AG (Switzerland) and our agent HP-Müller...
Inspire students for tech jobs
May 12, 2022 Students from Mechanical Engineering and Welding Construction (Mosa-RT in Belgium) paid a visit to Unisign These...
Succesful start in CNC milling market using Uniport machines
April 19, 2022 “Thanks to our Unisign machines, we have been able to take the bold step and expand our business into...
X-perience Unisign – Inloopmiddag
11 April 2022 Maak kennis met een wereldspeler in high tech machinebouw! Meld je aan voor onze inloopmiddag en bezoek onze...
State of the art bogie machining on UNIPORT6000
April 7, 2022 “The time taken to machine a bogie is now 5 hours per bogie, down from 120 hours previous when using older,...
Increased production for PALMS forest trailers
January 25, 2022 Due to growing demand for forest trailers, Palmse Mehaanikakoda needed to increase their machining capacity So,...
Happy and healthy 2022!
We thank all of you for your trust and cooperation in this memorable year with many challenges Hoping that things improve soon,...
Cool video – Total machining solution
December 15, 2021 A cool video of an impressive project! Check out this video about our total machining solution for ENGEL...
Unisign machines – the first choice for high-precision finishing
November 16, 2021 Brück GmbH in Germany is one of the leading specialists in the production of bespoke forged components that...
Launch – new CNC machine for rear axles
October 7, 2021 We have launched our revolutionary new CNC machine for the truck industry: the UNIAXLE A dedicated CNC machining...
Innovation for rear axle machining – free webinar
September 9, 2021 We are launching an innovation the truck industry has never seen before: a new CNC machine for rear axles! Rear...
Expert in accuracy
August 3, 2021 Products are only as accurate as the CNC machine that produces them It is therefore of great importance to keep a...
“This revolutionary design for machining rear axles is going to change the truck industry forever”
July 8, 2021 Unisign introduces UNIAXLE We have already set the worldwide trend for machining front axles for trucks and buses...
No downtime with two turning stations
June 29, 2021 Ready for transport to our customer KHS Group in Germany: last week the factory acceptance test was successfully...
Increasing manufacturing speed with Unisign portal machining centres
June 3, 2021 STT Servis in Dlouhá Loučka (Czech Republic) is a family company founded in 2001 In its early years, the company...
Revolutionary concept for machining rear axles
May 26, 2021 Are you producing truck rear axles And are you facing challenges in maintaining quality and accuracy Stay tuned for...
Your ideal choice for multitasking machining
April 22, 2021 Save time and money! Powerful turning AND powerful milling in a single set-up A pallet change in 60 seconds On...
Large, made-to-order components processed down to the smallest detail
April 8, 2021 As part of the HOMAG Group, HOMAG GmbH is one of the world’s leading suppliers of efficient all-in-one solutions...
Your ideal choice for machining LARGE components
March 29, 2021 6500 kilograms, 7,5 m long and 1,5 m in height Always wondered how such large components are machined with...
Total machining solution: three UNICOM6000 machines connected together via FMS
March 16, 2021 ENGEL is a global supplier of machines and automation solutions for injection-moulding processes With its nine...
UNICOM6000 – indispensable for production of large pumps
February 25, 2021 Discover our new case study on the Wilo Gruppe: one of the world’s leading manufacturers of high-tech pumps...
Front axles exclusively machined on UNITWIN6000
February 2, 2021 Rába Automotive Holding Plc shares their experiences with Unisign in a brand new case study With over one...
Live stream factory acceptance test
February 1, 2021 We successfully completed the factory acceptance test of the UNIPORT6000 for PALMS (Palmse Mehaanikakoda...
New UNIPORT4000 gantry CNC machine
January 18, 2021 The ideal choice for CNC machining of large components from various materials We are launching the new version...
Powerful allrounder and flexibility for MultiCam
January 6, 2021 Just before the turn of the year we completed a great project: the commissioning of a UNIPORT6000 at MultiCam in...
Happy and healthy 2021!
We thank all of you for your trust and cooperation in this memorable year with many challenges Hoping that things improve soon,...
UNISIGN quality in its most compact form yet!
December 17, 2020 Launch of new portal CNC machine The NEW version of our UNIPORT4000 gantry machine will be on the market soon...
UNIPORT6000: The beating heart of the production process
November 26, 2020 UNIPORT6 becomes UNIPORT6000 – discover our case study of Homag Kantentechnik GmbH HOMAG Kantentechnik...
High accuracy and process stability with Unisign machines
November 4, 2020 Customer satisfaction of GEMAG Gelenauer Maschinenbau AG, Germany in a new case study: GEMAG Gelenauer...
Higher – Wider – Faster
October 29, 2020 Discover how a large portal CNC machining centre is installed on site: our UNIPORT6000 at BMA Braunschweigische...
Performing multiple operations on complex welded structures
September 29, 2020 We are very proud to share a case study of our highly valued customer VDL Konings, the Netherlands Konings was...
Machining front axles revolves around efficiency
September 3, 2020 Machining forged non-drive front axles for trucks and buses comes with its challenges As the market leader in...
Universal CNC machine for small parts and large components
August 24, 2020 We are very proud to share the case study of our highly valued customer Ferdinand Steck Maschinenfabrik,...
Truck front axles machining at RABA
July 20, 2020 Ready for action! Our customer RABA in Hungary can start machining truck front axles on their Unitwin 6000...
Machining of parts for debarkers
July 13, 2020 “We are ready to rock`n roll with our Uniport 6000!!” says Jari Linden, Manufacturing Manager at Valon Kone...
Development of deburring robot
July 1, 2020 In recent months, Bart Winkelmolen and Maarten Visser have been working on the development of a deburring robot for...
Smooth CNC machining of pump and valve equipment
Standards are high in the oil and gas, chemical, mining and food sectors The quality and reliability of pumps and valves is...
Unimast: the best CNC machine for forklift truck mast profiles
May 12, 2020 The telescopic mast is perhaps the most important component of a forklift truck, so processing the mast profiles is...
Old NC programs operate 1:1 on new CNC machine
April 14, 2020 We are very proud to share the reference of our highly valued customer ABB Turbocharging, Switzerland: “In 1999...
Inspiring young people!
February 26, 2020 Promoting and inspiring young people and awakening their enthusiasm for a technical profession and career in...
Uniport 6000 for USA based MultiCam
January 23, 2020 This Uniport 6000 for MultiCam is ready for shipment to the USA The factory acceptance test for the CNC...
Certificate renewal ISO 9001:2015
January 14, 2020 Congratulations to our team for getting our ISO 9001:2015 for Quality Management System certification renewed! A...
Uniport6000 for HOMAG wood processing solutions
This week the factory acceptance test for the Uniport6000 CNC machining center for HOMAG GmbH has been successfully...
Happy New Year!
As we´re finishing this year, we would like to thank all of you for your trust...
Puja ceremony for CNC machine
The Hindustan Puja ceremony in India is the traditional way to bless a new machine and its operators Last November our new...
Uniport6000 for band saw machines
Successful commissioning and start-up of our Uniport6000 CNC machine at PEGAS – GONDA in the Czech Republic PEGAS...
EMO2019: a big thank you
An amazing week it was: from 16 to 21 September, about 117,000 production specialists from 150 countries visited the world’s...
Production increase for PALMS forest trailers
Palmse Mehaanikakoda LLC is a mechanical engineering company, located close to Palmse in Estonia Since more than 20 years the...
EMO2019: improve your machine performance
At EMO 2019, Hannover, we showcase our complete range of high-end CNC machining centres for milling, drilling and turning...
Summer Event 2019
On Friday 12 July we started our summer holidays with the Unisign Summer Event During the event we have honored our jubilees of...
Successful Dealermeeting 2019
With pleasure we look back on a successful dealermeeting! The morning program contained an interesting workshop of Wim van der...
International Dealermeeting 2019
The final preparations for the 12th International Dealermeeting are in full swing From June 25th until 27th we welcome more...
Forklift profiles – powerful machining and automatic transfer
Forklift masts are constructed from rolled steel channel profiles that can vary in length from 1 to 6 meters As these channel...
Unisign at Prodex 2019, Switzerland
From 14th to 17th May Unisign will be represented by our agency HP Müller Werkzeugmaschinen AG on the Prodex trade fair in...
Unisign at Mach-Tech 2019 in Hungary
From 14th to 17th May Unisign is represented by our agency Rother Metal Kft on the Mach-Tech trade fair in Budapest...
Maximum flexibility: Uniport 6000-HV with carousel turning table
Unisign will supply a Uniport 6000 HV machine with carousel turning table to ÖSWAG in Austria ÖSWAG Maschinenbau located in...
Automated production of front axles reduces costs per piece
Rába is a large Hungarian supplier of front and rear axles for trucks, tractors and buses It operates six Univers 6 machines for...
Unisign team at running event Venloop 2019
This weekend the 14th edition of the Weir Venloop takes place in Venlo, the Netherlands The Weir Venloop is a well known running...
Thank you for visiting us at AMB 2018, Stuttgart!
On behalf of the UNISIGN Sales Team, we would like to thank all our visitors for their interest in our products and services! We...
UNISIGN Partner in Productivity, AMB 2018 – Hall 9, Stand D52
Also in the 45th anniversary year, UNISIGN will be exhibiting during the AMB 2018 in Stuttgart (18 – 22...
Anniversary weekend 45 years UNISIGN, June 22nd & 23rd.
Friday afternoon, the festivities started with a nice, pleasant and inspirational gathering for all employees, followed by a...
UNISIGN supplies machine for milling and grinding at SafanDarley
UNISIGN takes an important position as global producer of innovative and proven machine tool technology in all market segments...
SafanDarley: “UNISIGN understands what we do and focusses on what we really need!”
“No-nonsense and a service that continues, also after the purchase They understand what we do” That is how Mark Das from...
Very successful Demo Days!
On behalf of the UNISIGN Sales Team, we would like to thank all our visitors for their interest and great feedback we received...
UNISIGN Demo Days in full swing!
We had a successful start of our Demo Days (10-11 April) in Panningen and are very pleased to welcome so many visitors already!...
Friday 23 March 2018, UNISIGN celebrated its 45th anniversary!
In the morning the entire staff was treated to a delicious jubilee pastry UNISIGN was founded on 23 March 1973 by Bart van Ruth...
UNISIGN Demo Days April 10-11th, 2018
Following the first presentation of the UNIPORT 6000-HV at the EMO 2017, we are pleased to invite you to our Demo Days which will...
RC Engineering Turkey purchases a 26m long Uniport 6000
Unisign takes an important position as global producer of innovative and proven machine tool technology in all market...
UNISIGN hosts the VERICUT Users’ Exchange (VUE) Netherlands 2017
November 21st, we had the privilege to host the VERICUT Users’ Exchange (VUE) Netherlands 2017 and combined it with an...
Thank you for visiting us at EMO 2017, Hannover!
On behalf of the UNISIGN Sales Team, we would like to thank all our visitors for their interest in our products and services! It...
Unisign exhibits at EMO Hannover, Hall 13-C54!
UNISIGN will be exhibiting during the EMO 2017 in Hannover (18 – 23 September) Fitting with its ever growing market...
Dealermeeting 7 – 9 June 2017
June 7-9th , we were pleased to receive all our representatives from around the world visiting Unisign They participated in a...
Thank you!
Intec 2017 in Leipzig (7-10 March), the international trade fair for machine tools, manufacturing and automation was a great...
UNISIGN installs UNIPORT 6000 at Ferdinand Steck Maschinenfabrik AG
UNISIGN takes an important position as global producer of innovative and proven machine tool technology in all market...
Unisign in action during Venloop 2017!
On Sunday, March 26th, the 12th edition of the Weir Venloop took place in Venlo As every year, Unisign signed up for this great...
Deharde Maschinenbau Germany about Unisign
Customer satisfaction is very important to Unisign so we are very proud to share the reference of our highly valued customer...
Stafsjö Valves AB installs Uniport 6000
Stafsjö Valves AB installs Uniport 6000 Our customer Stafsjö Valves AB (Sweden) is a world leading provider of high performance...
UNISIGN exhibits at Metalloobrabotka, Moscow
UNISIGN is delighted to announce its attendance of the 18th International Exhibition Metalloobrabotka in Moscow (May...
Unisign exhibits at Intec Leipzig
UNISIGN will be exhibiting during the Intec 2017 in Leipzig (7 – 10 March) Unisign will be exhibiting together with its...
AMB international exhibition for metal working
Also this year UNISIGN will be exhibiting during the AMB in Stuttgart You can find us in hall 9, stand B72A The World of...
Unisign launched its new responsive corporate website
The new version is aimed at enhancing customer engagement and providing comprehensive...
Mill Turn solutions
UNISIGN has developed a whole range of modern turning & milling machining centres with large working...
Automation
Unisign has years of experience in the development of automation and product handling...